Flash64 Update (01.31.2026)
F64 Multi-Programming Edition V1.01.31.2026 is now updated. You can connect up to 32 F64 boxes on one computer, but each box needs its own folder, special EXE file, and extra power. New support is added for Oppo, Realme, OnePlus, Vivo, iQOO, and Samsung phones. It can also read more firmware files like PAC, XML, and Scatter. Factory reset is improved.
Key Features and Enhancements:
1. Auto LBA Skip on UFS with Secure Write-Protected Blocks
- This feature automatically bypasses LBA errors on secure write-protected blocks, ensuring smoother operations.
2. UFS Secure Write Protection Removal (WP Remove)
- Advanced option to remove secure write protection from UFS storage.
- Use this option at your own risk.
- Most UFS devices will experience 100% data loss, except for a few exceptions listed below.
Data Loss Risk Analysis by Brand & UFS Specification
| Brand | UFS Specification | Data Status after WP Remove |
|---|---|---|
| Samsung | 2.0 | NO Data Loss |
| Samsung | 2.1 | NO Data Loss |
| Samsung | 2.2 | NO Data Loss |
| Samsung | 3.0 | NO Data Loss |
| Samsung | 3.1 | NO Data Loss |
| Samsung | 4.0 | WARNING: 100% Data Loss on all LUNs! Backup required! |
| YMTC | 2.2 | NO Data Loss |
| Other Brands (SkHynix, Micron, KIOXIA, etc.) | Any Version | 100% Data Loss on all LUNs! Backup required! |
Flash64: The Fast UFS/eMMC Programmer That’s Revolutionizing Data Storage Solutions!
Unmatched Compatibility & Speed
Flash64 Ultra supports a wide range of storage technologies for fast and efficient programming:
- UFS: Versions 1.0 to 4.1, up to HS-Gear speeds of 420 MB/s
- eMMC: Versions 4.1 to 5.1, up to 8-bit HS200 speeds of 200 MB/s
- Nano Memory Card (NM): Up to 4-bit 90 MB/s
- MicroSD: SDSC, SDHC, SDXC, SDUC up to UHS-I speeds of 104 MB/s
Advanced Diagnostic Interfaces
Equipped with essential interfaces for modern repairs:
- RFFE, JTAG, SPI, I2C, UART – For deep-level device troubleshooting
Cutting-Edge Connectivity & User-Friendly Features
Flash64 Ultra offers:
- Dual USB 3.2 Gen 1 & USB 2.0 for fast data transfers
- Wireless BLE 5.0 & WiFi 4 for flexible connectivity
- NFC-based warranty tracking for easy service management
- 1.69-inch IPS TFT LCD display for real-time monitoring
- Customizable RGB lighting to match your workspace
Supported Firmware/Flash File Formats
Flash64 supports direct flashing of:
- Binary Files
- IMG Files
- Samsung Tar MD5 & Tar Files
- Qualcomm XML Files
- MTK Scatter & MTK XML Scatter Files
- .BAT Batch Files & .SH Shell Scripts
- Spreadtrum (Unisoc) PAC Files
- OnePlus OPS Files
- ASUS RAW Files
- Motorola Flash & Service XML Files
- Huawei Update APP Files
- Sony Update XML Files
- LG KDZ Files
Unpacking & Checksum Verification Support
Flash64 can unpack and verify:
- Android payload.bin
- Oppo OFP Files
- OnePlus OPS Files
- Unisoc PAC Files
- ASUS RAW Files
- Sony SIN & FTF Files
- LG KDZ Files
Latest MTK Scatter File Support
Now supports MTK Scatter Files with Regional Provisioning in XML format. Compatible with latest Oppo, Vivo, and other 5G devices.
Changelog
🚀 F64 Multi-Programming Edition – V1.01.31.2026 Update
📅 Version 1.01.31.2026Box Firmware Update is recommended before using this updated software
🔧 New Features & Enhancements
Multi-Box Support
- Up to 32 F64 boxes can be connected to a single computer.
- Each box requires its own folder and Multi-Programming Edition EXE.
- Use an external 5V (1000 mA) USB-C power source for each box.
- Ensure your computer has sufficient resources for bandwidth and power demands.
RPMB Key Read – NON-SECURE DL6DAB (KMDL6001DA-B425)
- Works only after eMMC FFU + Full Factory Reset.
- ⚠️ Do not use on SM-A055F BIT 10/11.
- Not for devices without RPMB provisioning on blank eMMC.
- Use only if you fully understand the above conditions.
Firmware Support Expansion
- Added support for Oppo, Realme, and OnePlus 2026 Official Firmware Files.
Partition Handling
- Automatic loading of single partition files from the same folder.
UFS Provisioning Enhancements
- Support for Unisoc PAC & XML files.
- Support for MTK Scatter XML files.
Partition Skipping
- Automatically skips Unisoc RF/IMEI partitions from factory firmware files.
Factory Reset Improvements
- Enhanced Android Factory Reset for Oppo, Realme, Vivo, and iQOO devices.
Device Info Reading
- Added Vivo, iQOO, Jovi Read Device Info (thanks to hello-firmware.com).
Security Patch Fixes
- Corrected Security Patch Version Reading for A16 Vivo, iQOO, and Jovi phones.
TXN Option Update
- New TXN "AUTO" mode automatically switches between TXN values.
Samsung eMMC FFU Addition
- Added support for RP64AB : KMRP60014A-B614 (contributed by 0x9k – Circuit Knight X).
Bug Fixes & Improvements
- Behind-the-scenes fixes (thanks to Mr.UPROM!).
- Improved SkHynix eMMC detection (thanks to hello-firmware.com).
🎯 Reminder: Always use the correct tools and follow proper procedures.
💡 Your old tools make you wait. F64 makes you money. Stop waiting. Start earning.
File Information
File Name: Flash64 New Update - V1.01.31.2026 .zip
File Size: 62 MB
File Type: Free
Password: 123456
How to Use
- Download the tool by clicking the download button.
- Extract the file using 7-Zip or WinRAR.
- Enter the password when prompted (click to copy).
- If it's a portable tool:
- Run F64_Ultra.exe from the extracted folder.
- Need to connect box:
- Connect the box to your computer
- Connect the mobile using ISP pinout
- Use based on your EMMC/UFS chip operation